Interface and Study Cards

ADC - 0809 Interfacing Module

Code: IS1

ADC module using ADC-0809. 8 bit accuracy ADC chip Eight Channel on-chip multiplexed ADC. A/D Conversion time 100 micro sec…

Details Enquire

DAC - 0800 Interfacing Module

Code: IS2

8 bit accuracy DAC chip Dual channel DAC using 2 Nos. of DAC-0800. DAC settling time is 100 ns DAC output is provided at tw…

Details Enquire

AD - 574 Interfacing Module

Code: IS3

ADC module using AD-574 chip. 12 bit accuracy ADC chip Single channel ADC module. A/D conversion time of 15 micro sec. …

Details Enquire

Digital I/O Interfacing Module

Code: IS4

8 Digital Inputs provided using 8 way DIP Switch 8 Input LED Indicators are provided 8 Output LED Indicators are provided C…

Details Enquire

Elevator Simulator Module

Code: IS5

Four floor elevator simulator model LED indication for Each Floor is provided Up & Down Lift position indication by 10 Nos. of L…

Details Enquire

IC Tester IM For IC - 7400

Code: IS6

On-board two nos. of 14 pin socket and one no. of 16 pin Socket provided. One 14 Pin IC- 7400 IC is provided for testing. Connect…

Details Enquire

Four Digit Seven Segment Display

Code: IS7

Four digit seven segment display. Display technique used is serial in parallel out shift register technique For this technique t…

Details Enquire

Stepper Motor Controller Card With Motor

Code: IS8

This Card can Control a Two/Four phase motor Half Step, Full Step can be controlled using this card. Clock Wise & Anti Clock wis…

Details Enquire

5x4 Keys Matrix Keyboard Interface Module

Code: IS9

5x4 Keys matrix Keyboard. Keyboard consists of 20 keys. Consist of hexadecimal numerals from 0 to 13. Keys are organized as…

Details Enquire

16x1 LCD Display Module

Code: IS10

16x1 Liquid Crystal Display. One 16 rows Alphanumeric Characters will be Displayed. Facility for back lite display. Connect…

Details Enquire

16x2 LCD Display Module

Code: IS11

16x2 Liquid Crystal Display. Two 16 rows alphanumeric characters will be displayed. Facility for back lite display. Connect…

Details Enquire

Traffic Light Controller Module

Code: IS12

Single Square traffic light display controller East, west, north, south posts are defined on the PCB for the square. For each po…

Details Enquire

Temperature Measurement Module

Code: IS13

ADC-0809 is used for analog to digital conversion. 8 bit accuracy ADC chip A/D Conversion time is 100 micro sec. Op-amps ar…

Details Enquire

DC Motor Controller Card With Motor

Code: IS14

DAC-0800 is used for digital to analog conversion. 8 bit accuracy DAC chip SPDT Relay is provided for direction control Clo…

Details Enquire

Relay And OPTO Coupler Interfacing Module

Code: IS15

Four SPDT Relays are provided. Relay outputs NO, NC, COM is provided at Screw Terminals. Four Opto isolator inputs are provided …

Details Enquire

8x8 LED Matrix Interfacing Module

Code: IS16

8x8 LED Matrix Display. Display consists of 64 nos. of 3mm LED. LED’s are organized as Eight Rows & Eight Columns matrix. …

Details Enquire

Thumb Wheel Switch Card

Code: IS17

Two digit thumb wheel switch. Thumb wheel switch can be set from 00 to 99. Output of Thumb wheel switch is in BCD format. C…

Details Enquire

Light Sensing Module Using LDR

Code: IS18

Light Sensing device using LDR For Alarm indication one SPDT Relay is provided. Relay output is provided in connector. Conn…

Details Enquire

OPTO Isolated Input Module

Code: IS19

8 bit OPTO Isolated input using MCT-2E IC. OPTO inputs indication are provided by 5mm LED. OPTO inputs are provided through 16 p…

Details Enquire

OPTO Isolated Output Module

Code: IS20

8 bit OPTO Isolated output using MCT-2E IC. OPTO outputs indication are provided by 5mm LED. OPTO output are provided through 16…

Details Enquire